Visioneer XP 100 To calibrate the scanner, Do not remove the sheet until calibration is finished

STEP 3: CALIBRATE THE SCANNER 25

To calibrate the scanner:

1.Strobe XP 300 only: Close the scanner’s paper return so the calibration paper will feed straight through the scanner.

Strobe XP 200 only: Move the scanner’s Paper Return into the Up position so the calibration paper will feed straight through the scanner.

2.Insert the calibration page into the page feed.

The scanner grabs the paper and feeds it through the scanner.

The scanner will automatically pass the sheet back and forth several times.

Do not remove the sheet until calibration is finished.

3.When calibration is complete, the calibration paper will back out of the scanner.