Visioneer XP 100, XP 300 manual Connect the Strobe XP 200 Scanner

22VISIONEER STROBE XP SCANNER USER’S GUIDE

CONNECT THE STROBE XP 200 SCANNER

The cable provided with the scanner is called a USB “Y-cable,” and you will need to connect it to the scanner, computer, and a power outlet.

USB Y-Cable AC Adapter

1.Using the on-screen window as your guide, plug the AC adapter cable into the power jack on the USB Y-cable. Then plug the AC adapter into an electrical outlet.

2.Plug the cable into the connection port on the back of the scanner; please be sure the arrows on the cable line up with the arrows on the scanner to avoid pins getting bent while inserting the connection.

3.Plug the cable’s USB connector into a USB port on your computer.

The USB symbol on your computer identifies the location of the USB port. If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection.

Note: You can also connect the scanner to a USB hub if the hub has its own power supply plugged into an electrical outlet.

4. Now proceed to “Step 3: Calibrate the Scanner” on page 24.