140VISIONEER STROBE XP SCANNER USER’S GUIDE
Maintenance
This chapter contains information on recalibrating, troubleshooting, cleaning, uninstalling, and scanner specifications.
RECALIBRATING OR CLEANING YOUR SCANNER
You calibrated your scanner during installation, but after many hours of use you may find that scanned images may not be a sharp and clear as when you began using the scanner. In that case, recalibration may solve the problem.
If your scanned images have streaks, smudges, or dirt spots, you may need to clean the scanner with the Cleaning Paper.
To recalibrate your scanner:
1.Strobe XP 300 only: Close the scanner’s paper return so the calibration paper will feed straight through the scanner.
Strobe XP 200 only: Move the scanner’s Paper Return into the Up position so the calibration paper will feed straight through the scanner.
