Xerox 752 manual Using the One Touch Panel

Scanning

To Refresh the One Touch 4.0 settings, click the Refresh button.

If you make changes in the One Touch Properties window, then click the Apply button, the information in the One Touch panel will update to show the new settings.

3. When you’re ready to scan, just click (not right-click) the button.

NOTE: The OneTouch Properties window must be closed before you can scan from the Button Panel.

Using the One Touch Panel

The One Touch Panel is your on-screen control for the scanner. The One Touch Panel also shows information about the scanner and its settings.

1.To open the One Touch Button Panel, click the One Touch icon. It is located in the Windows Notification Area at the bottom right corner of the screen.

The One Touch Button Panel opens at its Button View, which shows the on-screen scanning buttons.

The Button View.

2.To scan from the panel, click the icon you want to use to scan.

3.To see the detailed settings for a button prior to scanning, click on the green arrows to navigate through the panel’s three views.

Click these arrows to navigate through the panel’s three views.

The Button View.

The Hardware View. The Detail View.

•The Button View is your main scanner control panel. Use it to scan or to see all nine buttons.

•The Detail View shows the current scan settings for a button.

DocuMate 752 Scanner User’s Guide 29