Xerox 752 manual Click the Preview button

Scanning with the TWAIN Interface

6.AutoCrop—Select this option to let the scanner automatically determine the size of the item being scanned. For example, if you scan a 5”x 7” photo, the scanner will determine the size of the photo.

For single-sided scans, the scan area is the size of the image. For double-sided scans, the scan area is the size of the larger of the two areas on the front and back of the page.

7.Straighten—Select this option to let the scanner automatically determine if a page is skewed, then straighten its image. The scanner detects page edges and can sense when the page is fed through at an angle. However, if the page is fed through at too great an angle, the image may not straighten correctly. In that case, re-scan the page using the paper guides to feed the paper in straight.

8.Click the Preview button.

The scanner scans the item and displays a preview image. If you selected the Autorotate 90 option, the preview image is not rotated until the final scan is completed.

You can now use the options on the Basic Interface to adjust the image.

NOTE: If you want to preview a stack of pages, use one of the pages as a test page and load it into the scanner. Click the Preview button and adjust the scanner settings. Then replace the page on the stack at its original position and load the stack into the scanner. Then just click the Scan button.

9.Adjust the Brightness, Contrast, and Resolution until the picture is what you want. You can also change the picture type again, for example, from color to grayscale.

10.When you are satisfied with the preview image, remember to place the document into the ADF again if you’re scanning a stack of pages. Click Scan.

11.When you’re finished scanning items, click Done to close the Basic Interface.

12.The scanned images will appear in the TWAIN application you’re using.

86 DocuMate 752 Scanner User’s Guide