Xerox manual Connect the Power Supply, To connect your DocuMate 752 scanner

Installation

Step 3: Connect the Power Supply

Connect the power supply and power cord, and plug the power supply into an electrical outlet.

To connect your DocuMate 752 scanner:

1. Plug the power supply into the power port on the scanner.

NOTE: Only use the power supply (model number: HEG42- 240200-7L(A) LF from HiTron) included with your scanner. Connecting any other type of power supply may damage your scanner, and will void its warranty.

2.Plug the power cord into the power supply then into a wall outlet.

Now proceed to the next section, “Step 4: Connect the USB

Cable and Turn on the Power.”

14 DocuMate 752 Scanner User’s Guide