Scanning with the TWAIN Interface
Scanning with the TWAIN Interface
In addition to using the One Touch Button Panel to scan, you can also scan using the TWAIN interface. Many applications can use TWAIN for scanning.
A Note About Your Scanner and the TWAIN standard: TWAIN is a widely recognized procedure that computers use to receive images from scanners, digital cameras, and other digital devices. Because the TWAIN interface is essentially the same regardless of the software you use to open it, you can still use the instructions in this User’s Guide for scanning with your Xerox DocuMate 752 scanner. The steps below show the basic process to open the TWAIN interface, but to open it in specific software applications please refer to their user’s guides, then return to this User’s Guide for the steps to scan.
NOTE: If the One Touch configuration you are using to scan is set to Configure Before Scan, and the selected option is TWAIN, the TWAIN interface opens right away. You don’t need to open it from another application as explained in the following steps.
82 | DocuMate 752 Scanner User’s Guide |
