Specifying a Track, MP3, Repeat Play | Ego Technology 4000 Plus

E G O 4 0 0 0 P L U S O P E R AT I O N M A N U A L

OPERATING INSTRUCTIONS continued

SPECIFYING A TRACK

To select a desired track, press SCAN UP/DOWN button repeatedly until the desired track is found. The LCD display will show the track number as you search.

MP3

While MP3 disc is playing, you may

1.Press SCAN UP button repeatedly to skip

forward to choose the track or directory desired. Playback will begin automatically.

2.Press SCAN DOWN button once to skip backward to the beginning of the current track. Press SCAN DOWN button repeatedly to skip backward to choose the track or directory desired. Playback will begin automatically.

NOTE: While playing, press SAS/+10 button to skip forward for 10 tracks each time.

REPEAT PLAY

While playing a CD/MP3 disc, you may press MODE button to activate one of three different repeat settings. Each successive press of MODE button changes the setting:

1.One-Track Repeat - During playback, press

MODE button until “REPT 1” indicates on the display. The current track will be repeated continuously.

2.One-Directory Repeat - During MP3 playback only, press MODE button until “REPT DIR” indicates on the display. The current directory will be repeated continuously.

3.All-Track Repeat - During playback, press MODE button until “REPT ALL” indicates on the display. All tracks will be repeated

continuously.

1.Stop playback by pressing STOP button.

2.Press MODE button until “INTRO” indicates on the display.

3.Press PLAY/PAUSE button, and Intro Scan starts at once from the first track.

4.To cancel Intro Scan, press STOP button.

SHUFFLE PLAY

You can have the player play all tracks randomly with the Shuffle Play feature. Follow the steps below to initiate Shuffle Play:

1.Stop playback by pressing STOP button.

2.Press MODE button until “SHUFF” indicates on the display.

3.Press PLAY/PAUSE button, and Shuffle Play starts at once.

4.To cancel Shuffle Play, press STOP button.

PROGRAMMED PLAY

TO PROGRAM A CD/MP3

PLAYBACK SEQUENCE:

1.Stop playback by pressing STOP button.

2.Press EQ/PROG button until “PROG” indicates on the display along with “PROGRAM: 01”.

3.Press SCAN UP/DOWN button repeatedly to find the track to be programmed.

4.Press EQ/PROG button again to save it as “PROGRAM: 01” then PROGRAM: 02” etc.

5.Press PLAY/PAUSE button to play the programmed track while “PROG” is shown on the LCD display.

6.Repeat steps 1 to 5 to program all tracks up to 99 tracks.

MP3

1.	Stop playback by pressing STOP button.
2.	Press EQ/PROG button until “PROG” indicates
	on the display along with “PROGRAM: 01”.

When MP3 playback is stopped but power is still on, you may

1.Press SCAN UP/DOWN button repeatedly to find out the desired directory or the track.

2.Press PLAY/PAUSE button to start play from this track on.

INTRO SCAN

You can preview the first 10 seconds of each track to conveniently search for your desired track. Follow the steps below to initiate Intro Scan playback:

You can program up to 99 tracks to play in any order you choose. The same track can be pro- grammed for more than once.

3.	Press ALBUM button to select the desired
	directory.
4.	Press SCAN UP/DOWN button repeatedly
	to find the track to be programmed.
5.	Press EQ/PROG button again to save it as
	“PROGRAM: 01” then PROGRAM: 02” etc.