Wideband Pair (with FED)
The Wideband Test screen displays the type of test (Basic or Full), the type of service (56 KB, 64 KB, ISDN, HDSL, T1, E1, ADSL), the wire gauge, the FED type and the cable type. If the CTC SmartStrap™ has been selected for the FED, two additional test leads that are used to control the SmartStrap will
be shown on the screen. If the 965DSP has DSL Parametric Test capability (/SA option) and the 3M FED II has been selected for the Far End Device, five additional service types (HDSL2, HDSL4, H2/4ACC, H4NACC and H4RACC) can also be tested.
Wideband Auto Menu - FED II
Note: Always connect the 965DSP test leads to Pair 1 regardless of which pair is being tested. Pair 2 testing will require the user to move the test leads to Pair 2 when prompted.
Wideband Auto Menu - SmartStrap
Press the [Setup] key to change the Wideband Test parameters.
123
