Ohms/Distance
Use this function to convert from Ohms to Distance based on temperature and wire gauge.
Enter the value of Ohms, then press the [Tab] key to select gauge or temperature. If you select “gauge,” press the [Up] and [Down] keys to select the desired gauge. If you choose “temperature,” enter the value of the desired temperature using the blue keys.
Press the [Enter] or the [Tab] key when you are ready to convert from Ohms to Distance. The screen shows the total loop length, and half the length
(if you are measuring the distance to the end of a strapped pair).
Press the [Setup] key to enter Distance instead of Ohms. All control keys work the same as above when entering distance.
40
