3M 965DPS instruction manual Test Results

K-Test Results

The 965DSP will display the following screen if there are no problems with the “Close Far-End” portion of the test:

The 965DSP displays the Resistance to Strap (RTS), Resistance to Faults (RTF) and the Resistance Strap to Faults (RSTF).

The 965DSP displays the open and closed fault ratios. These values are used in some countries as part of the K-Test.

Use the [Tab] key to display distances to the faults and strap instead of resistance.

The 965DSP displays the last wire gauge and temperature selected. Use the [Setup] key to change either the wire gauge or the temperature used for the conversion from resistance to distance.

Use the [Left] arrow key to repeat the K-Test on the same pair. The screen keeps count of the number (in the lower right) of times the test is repeated.

Use [Enter] to see a summary of up to five K-Test measurements.

44