Out of the Box
What you will find when you unpack the shipping box:
•3M™ Dynatel™ 965DSP Series Subscriber Loop Analyzer
•Carrying case
•NiMH battery pack (inside the 965DSP)
•Spare battery holder
•Test Leads (red/black pair, blue/yellow pair, green)
•Shorting strap
•AC charger
•Power cord
•Instruction manual
•Quick card and Warranty card
•
Visually inspect all components. If any component is missing or appears damaged, do not install and call customer service at
The Dynatel 965DSP comes in the carrying case and should remain in the case to give extra protection from shock and the environment.
A NiMH battery pack is already installed in the 965DSP. You may need to charge the battery before using the unit. Please see Care and Maintenance section. The Spare Battery Holder holds six “AA” alkaline batteries and should only be used if the NiMH battery pack is discharged.
The 965DSP comes with 5 test leads: red/black, blue/yellow and green. The Shorting Strap is only used in RFL mode.
The AC charger will convert 110 or 220 Vac into the 12 Vdc used for charging the 965DSP. A North American 110 Vac Power Cord is provided with the unit. The AC charger is meant for charging the NiMH battery pack only. Do not use the AC charger to power the 965DSP during normal operations.
Additional information is also found in the 965DSP help screens. For Technical Service, Warranty or Repair questions call: 800 426 8688 in the US or Canada, or contact your local 3M Representative.
Communication Markets Division
3M Telecommunications
6801 River Place Blvd.
Austin, TX
4
