Splice Locate
Use this function to find the location of a splice in two sections (of different wire gauges) of cable.
Start
Connect the red and green leads to the pair.
Connect the strap at the
Use the [Tab] key to select either: 1) the first section wire gauge, 2) the second section wire gauge, 3) the Distance to Strap (DTS), or 4) the temperature.
If you select either section, use the [Up] and [Down] keys to select the wire gauge. You may NOT use the same gauge for both sections.
If you select either the DTS or the temperature, use the blue keys to enter the appropriate value.
Press [Enter] when you have connected the 965DSP and have entered the correct gauges, temperature and distance to strap.
The screen will display the distance to the splice and the distance from the splice to the strap.
Press [Enter] to repeat the test after the results have been displayed on the screen.
51
