Note: This screen is continuously updated in Continuous Test Mode.
FAST: Achieved line rate in kilobits per second on the Fast channel.
INTR: Achieved line rate in kilobits per second on the Interleaved channel.
Note: FAST or INTR will display with the achieved line rate to indicate the selected channel type.
MAX: Maximum possible attainable line rate in kilobits per second.
MRGN: Noise margin in dB above the minimum Signal to Noise Ratio (SNR) required to maintain the data rate (as set by the DSLAM).
ATTEN: ADSL signal attenuation in dB at each end of the line.
PWR: | ADSL total output power in dBm at each |
| end of the line. |
CAP: | Line capacity percentage comparing the |
| achieved data rate to the maximum data |
| rate the line will support. |
Press the Info key to display more ADSL modem connection information. If Thresholds are enabled, use the Pass Fail arrow to return to the previous screen.
ADSL Info
This screen displays channel performance data as well as the DSLAM modem manufacturer information (if available).
Note: This screen is continuously updated in Continuous Test Mode.
79
