During the measurement a bar graph of the measurement null voltage for RTS and then RTF will be visible at the bottom of the screen.
The results at the top of the screen indicate the “Distance to Strap”. The results on the second line indicate the “Distance to Fault” and the “Distance, Strap to Fault”.
The screen shows the fault resistance beside the resistor symbol. The wire gauge, temperature and section number are displayed above the bottom bar.
Press [Tab] to show readings in Ohms instead of distance. Press again to return to distance. Press [Enter] to repeat the fault locate using the same Distance to Strap or the [Return] key to test a new pair. Press [Setup] to change the Gauge or Temperature.
62
