3M 965DPS instruction manual Select Results

Select Results

Use the [Up] and [Down] keys to highlight the desired stored result. Press the [Enter] key to select the highlighted result and display the stored results list for that ID number by type (Autotest or TDR), date and time.

Use the [Up] and [Down] keys to highlight the desired stored result. Use the [Right] key to delete the selected result. Use the [Setup] key to print the selected result to a printer. Use the [Tab] key to upload the selected stored test result to a PC.

Press the [Enter] key to view the results for the highlighted selection. The results will be displayed in the format used in the actual test.

To print the results to a printer, you must have a compatible serial printer such as the Seiko DPU- 414-30B and a printer IR adapter cable (3M PN 26- 1014-6888-7 available through 3M Communication Markets Division Repair Center). The printer should be configured for 9600 baud, 8 data bits, 1 stop bit, no parity.

Uploading the test results to a PC requires an IR adapter cable (3M PN 80-6109-9197-0) and the PC Link Communications software package (available through 3M Communication Markets Division Technical Service Department).

32