Resistance
This function first measures the resistance between the red and black test leads.
Press the [Tab] key to move to the next test lead configuration.
The “V” in the upper right corner of the screen indicates that the resistance measurement compensates for C.O. voltage on the line.
Press the [Enter] key to remove the voltage compensation. Use this technique only if you have first determined there is no DC voltage on the pair (by using the Voltage function). The non- compensated measurement is slightly faster, but it is not as accurate if there is voltage on the line.
The resistance measurement can be affected by moisture on the test lead clips or terminal face. For the most accurate measurement make sure that these areas are dry.
24
