Autotest Save

You can save all of the results of an Autotest. After an Autotest has completed, press the [Save] key (camera icon) to save the results. The 965DSP will display the Save Results screen as follows:

The date and time display the 965DSP “system clock.” See the “Set Clock” section on page 12 for further information on setting the clock and for information on the format of the date and time.

Use the blue keys to enter an alphanumeric ID. The ID may have up to fourteen characters. Because there are not enough keys for all twenty-six letters, each of the number keys (except “1”) also function as letter keys for ID entry. Whether a number or letter is entered depends on how many times the key is pressed. As an example, if the Ohms key is pressed once, the number “3” will be displayed. If the same key is pressed twice, the letter “d” will be displayed, three times for the letter “e” and four times for the letter “f”. When the desired number or letter is displayed, press any other key to insert the next number or letter. This will cause the previously entered characters to move to the left making room for the new character. If the same key needs to

be used multiple times in a row (i.e. to enter the sequence ‘ABC2’), press the [Up] arrow to insert multiple spaces to the left of the cursor. Use the [Left] arrow to position the cursor under the first space and enter the first character, and then use the [Right] arrow to move the cursor under the next space. Insert the next character and use the [Right] cursor again to position the cursor to the next position. Continue entering numbers or letters in this manner until all have been entered. If you enter more than 14 characters, the first entered character will be discarded.

132

Page 132
Image 132
3M 965DPS instruction manual Autotest Save