AD-4402 Page 117
Category
address
symbol Name Descriptions Range
and
choices Default
5q f-39 Discharge
monitoring timer
Set the time limit to discarge it
When time is up and weighing value is
not zero band, sequence error
SQ.ERR5 is displayed.
If 0 is set, the timer does not work.
0 to
65535 s0 s
5q f-40 Discharge gate
close delay timer
Set the wating time from reacheing to
zero band to closing discharge gate for
gross.
0.1 to
25.5 s0.1 s
5q f-43 Batch finish output
on
Set the active (ON) time of batch finish
signal. If 0 is set, output is kept until next
sequence.
0.00 to
2.55 s0.00 s
5q f-44 Discharge finish
output on Set the time to keep the ON for
discharge signal. 0.00 to
2.55 s0.00 s
5q f-45 Recipe finish output
on Set the time to keep the ON for recipe
finish signal. 0.00 to
2.55 s0.00 s
5q f-46 Mixing finish output
on Set the time to keep the ON for mixture
finish signal. 0.00 to
2.55 s0.00 s
5q f-47 Mixing time output
on Set the time to keep the ON for mixture
time signal. 0 to
255 s0 s
5q f-48 Averaging Eval time
Set the time to average the resul t. This
time controls precision of the result.
Refer to Eval delay timer [5q
f-37] and Eval conditions [5q
f-13].
00.0 to
2.55 s0.00 s
s : second
d: digit