A&D PD4000243 manual Batch start delay timer

Advise

Using the automatic switch of normal batch and loss-in weight.

Specify the output terminal for the hopper number in the material code on the I/O. Specify the input terminal to change the mode on the I/O. [1n f-nn] [9] Connect the output terminal to the input terminal.

Connect the output common terminal to the input common terminal.

Set the delay time above 0.1 second at [5qf-32]	Batch start delay timer.
Weighing value
Full filling value	Gross weight
Full filling

Zero band

Net weight

0

Final value

- Final value + Optional preliminary

Optional preliminary

- Final value + Preliminary

Preliminary

- Final value + Free fall

- Final value

The active code is

Free fall

or -Target weight

only read at each

Tare command, Input

start. And keep it.

Material code, Input

Full flow, Output

Medium flow, Output

5qf-33

Dribble flow, Output

Full flow comparison interrupt timer

5qf-34

Medium flow comparison interrupt timer

5qf-35

Dribble flow comparison interrupt timer

If this command is

used, accumulation

and comparison can

be used.

Start command, Input

Waiting timer

Comparison

and stable.

5qf-37

Set the condition

at 5qf-13

Eval delay timer

Stable, Output

Batch finish, Output

5qf-43

Select a mode

Over weight, Output

Batch finish output

at 5qf-05

on

Acceptable, Output

Under weight, Output

AD-4402 Page 63