
8.2.7.Command List
Monitor Commands
Name | Code | Description |
|
Read weighing value | RDSP |
|
|
RW |
|
| |
|
|
| |
Read gross data | RGRS |
|
|
Read net value | RNET |
|
|
Read Tare value | RTAR |
|
|
Read weighing result | RFIN |
|
|
RF |
| #1 | |
|
| ||
Read setpint or | RSPTxxxx |
|
|
RSPT#### |
|
| |
Read comparison parameters |
|
| |
RSxx |
| #1 | |
|
| ||
Read material code | RCODxxxx | To read the details of the code. | # 1 |
Read recipe code | RRCDxxxx | To read the details of the code. | # 1 |
Read accumulation data | RTTLxxxx |
|
|
of material code |
|
| |
|
|
| |
Read accumulation data | RRTLxxxx |
|
|
of recipe code |
|
| |
|
|
| |
Read error code | RERR |
|
|
xxxx:Material code or recipe code.
#1: Compatible command to AD4401,
Write Commands
Name | Code | Description |
| |
| WSPTxxxx |
|
| |
Store setpoints | WSPT%%%% |
|
| |
SSxx |
| #1 | ||
Store comparison parameters |
| |||
SA | To store optional preliminary and zero | |||
| ||||
| band. | #1 | ||
|
| |||
Store material code | WCODxxxx | To store all parameters of the code. |
| |
Store recipe code | WRCDxxxx | To store all parameters of the code. |
|
xxxx:Material code or recipe code.
####: When reading an active material code or recipe code during the sequence, place four space codes (ASCII 20h).
%%%%: When storing new parameters to material code or recipe code that is recalled
| as next code in the sequence, place four space codes (ASCII 20h). |
#1: | Compatible command to AD4401, |
| Page 79 |