6. Applications

6.1. Hopper Scale with Material Code

In the section, applications are explained according to the right hopper scale that performs batch weighing using a material code.

An application is explained mixture of materials using a recipe code.

The foundation of hopper scale design is explained.

6.1.1.Definition of Material Code

The material code is necessary to store the details before use.

And the code is called with code number in a weighing.

The material code is used in the procedure that performs batch weighing or loss-in weigh. As the result of the procedure, a constant weight of the material, is called "full" or "full filling", can be got.

The material code consists of some index number (name) and some comparison values to get a constant weight of the material.

The AD-4402 can store a hundred kinds of material codes.

6.1.2.Recalling Material Code

The following steps are the explanation to recall the material code stored in the indicator. Suppose that the recipe code is not used. (The menu [Function] - [Function setting] - [Sequence] - [Basic] - [Recipe mode] is set to [5q f- 8] [0] )

Caution

The material code can be recalled during the last weighing. But the code effects after the batch finish (after finishing the last weighing).

Step 1 Press the CODE RECALL key.

Then the material code blinks.

Step 2 Enter the material code using numerical keys

The details of the material code are displayed in the sub-display. Step 3 Press the ENTER key to decide the code.

AD-4402

Page 25

Page 27
Image 27
A&D PD4000243 manual Applications, Hopper Scale with Material Code, Definition of Material Code, Recalling Material Code