AD-4402 Page 17
4.1.4.
4.1.4.4.1.4.
4.1.4. The Way of Calling a Code
The Way of Calling a CodeThe Way of Calling a Code
The Way of Calling a Code
In Case of a Material Code:
Step 1 Suppose that is set the function parameter [5qf- 8] to [0] .
Step 2 Press the CODE RECALL key in weighing mode.
Step 3 Set the number of a material code with the following keys:
The key is used to increase the code number.
SHIFT + Press and hold the SHIFT key and press the key is used to
decrease the code number.
Numerical The numerical keys and the ENTER key is used to select a
code number directly and to enter the parameters.
ENTER The ENTER key is used to specify the number.
ESC The ESC key is used to undo the last key and to return to the
last mode.
In Case of a Recipe Code:
Step 1 Suppose that is set the function parameter [5qf- 8] to [1] or [2].
Step 2 Press the CODE RECALL key in weighing mode.
Step 3 Set the number of a recipe code with the following keys:
, SHIFT + , Numerical, ENTER, ESC keys
4.1.5.
4.1.5.4.1.5.
4.1.5. The Way of Entering a Correction Mode
The Way of Entering a Correction ModeThe Way of Entering a Correction Mode
The Way of Entering a Correction Mode
In Case of a Material Code:
Step 1 Press and hold the SHIFT key and press the CODE RECALL key in weighing mode.
Step 2 Select a number of a material code using the following keys:
, SHIFT + , Numerical, ENTER, ESC keys
Step 3 Edit some items of a material code using numerical keys and the ENTER key.
Step 4 Press the ESC key to return to weighing mode.
In Case of a Recipe Code:
Step 1 Press and hold the ENTER key and press the CODE RECALL key in weighing mode.
Step 2 Select a number of a recipe code using the following keys:
, SHIFT + , Alphanumerical, A/a, ENTER, ESC keys
Step 3 Edit some items of a recipe code using alphanumeric keys and the ENTER key.
Step 4 Press the ESC key to return to weighing mode.