AD-4402 Page 65
7.5.3.
7.5.3.7.5.3.
7.5.3. Tare
TareTare
Tare
The relation of display is as follows:
Net = Gross - Tare
Concerning Parameters of the Function
Prohibiting tare during unstable weighing
[genf- 9]Tare and zero compensation at unstable status
[Function] - [Function setting] - [General] - [Weighing]
Prohibiting tare during negative weighing
[genf-10]Tare at negative GROSS weight
[Function] - [Function setting] - [General] - [Weighing]
Resetting tare at turning on the indicator
[genf-13]Clear mode at power ON
[Function] - [Function setting] - [General] - [Weighing]
7.5.4.
7.5.4.7.5.4.
7.5.4. Preset Tare (Fixed Tare Function)
Preset Tare (Fixed Tare Function)Preset Tare (Fixed Tare Function)
Preset Tare (Fixed Tare Function)
The preset tare can store in each material code.
Concerning Parameters of the Function
Using preset tare
[genf-11]Preset tare
[Function] - [Function setting] - [General] - [Weighing]
Using preset tare for partial material code
[genf-12]Preset tare=0
[Function] - [Function setting] - [General] - [Weighing]
Classifying normal tare and preset tare on the serial data
[genf-16]Activiation of fixed tare action
[Function] - [Function setting] - [General] - [Weighing]
7.5.5.
7.5.5.7.5.5.
7.5.5. Customizing Function Key (Key Design
Customizing Function Key (Key DesignCustomizing Function Key (Key Design
Customizing Function Key (Key Design)
))
)
Refer to 2.2.1. Keys of Front panel regarding key operation.
Refer to 10.4. Parameter List of Function list regarding key function.
Concerning Parameters of the Function
Setting F1, F2, F3 and F4 keys
[0tHf- 2] to [0tHf- 5]
[Function] - [Function setting] - [General] - [Other]