A&D PD4000243 manual Drawing Normal Batching of Sequential Weighing

Weighing value	Preliminary
		Gross weight
Final value (Target weight)
		Net weight
Final value - Free fall		Free fall
Final value - Preliminary
Final value - Optional preliminary
Optional preliminary
	Tare	Zero band

0
	The active code is only read at
	each start. And keep it.
Material code, Input	1
	0
Start command, Input			Time until supplying it
5qf-32
					The whole time to
Batch start delay timer
5qf-31					supply it
Batch monitoring timer
Full flow, Output
Medium flow, Output
Dribble flow, Output
5qf-33
Full flow comparison interrupt timer
5qf-34
Medium flow comparison interrupt timer
5qf-35					According to 5qf-37 and stable.
Dribble flow comparison interrupt timer				Comparison
					5qf-13 can be set.
5qf-37Eval delay timer
Stable, Output		5qf-43
Batch finish, Output
		Batch finish output				Select a mode
		on
Over weight, Output						at 5qf-05
OK, Output
Under weight, Output
Discharge start, Input
Discharge start delay timer			If discharge sequence,
Discharge monitoring timer			set the function.
Discharge, Output
Nearly zero, Output
Discharge gate close timer
Discharge finish, Output

Drawing: Normal Batching of Sequential Weighing

Page 40 AD-4402