
9. Maintenance
9.1.1.Basic Operation
To enter the maintenance | Press and hold the ENTER key and press the | ||
| key in weighing mode. | ||
| Select menu maintenance using the key and | ||
| the ENTER key. |
| |
To select an address of the parameter The | , SHIFT + | , ENTER, ESC keys. | |
To change the parameter | The | , SHIFT + | , Alphanumerical, ENTER, |
| ESC keys. |
| |
To exit the mode | The ESC key. |
| |
(To return to weighing mode) |
|
|
|
9.2. Monitor Mode
The monitor mode is used to check the indicator during the weighing sequence.
9.2.1.Monitoring Control I/O Function
Use to monitor the status of the I/O terminals.
When [genf- 1] is slow, it may not display all data.
|
| 123 kg |
CONTROL | 00010001000 | |
| a11 | a1 |
I/O |
| 00110100001 |
| b11 | b1 |
|
|
|
Input terminal A1
Output terminal B1
9.2.2.Monitoring Built-in RS-485 Interface
The current communication data are displayed.
Parity: p |
| 123 kg |
Framing:f |
| RNET |
| RNET0099,1234567,123456789 | |
| rcu and 5nd | |
|
|
|
Received data
Sent data
Page 94 |
|