Agilent Technologies B2201A manual Tst?

SCPI Command Reference *TST?

*TST?

This query command executes an internal self-test, then returns the result. After this command execution, the B2200 becomes same status as after *RST command execution.

Syntax	*TST?
Query response	test_result <newline><^END>
	test_result	Explanation
	0	pass
	1	fail
Example	OUTPUT @Agb2200;"*TST?"
	ENTER @Agb2200;A

*WAI

This command stops execution of any commands until the Operation Complete (OPC) bit is set to 1, which means there is no pending operation. See *OPC command.

Syntax*WAI

Example OUTPUT @Agb2200;"*WAI"

5-12 Agilent B2200 User’s Guide, Edition 2