Agilent Technologies B2201A manual Query Errors

Error Messages

Standard SCPI Error Messages

Query Errors

If the output queue control of the B2200 detects one of following problems, a -4XXerror occurs:.

•An attempt was made to read data from the output queue when no output data is present or pending.

•Data in the output queue has been lost.

If this type of error occurs, the error number and message are placed in the error queue, and bit2 of the Standard Event Status Register is set.

Error	Error Message and Description
Number
-400	Query error
	Generic query error for the B2200 that cannot be determined more
	specifically.
-410	Query INTERRUPTED
	A condition causing an INTERRUPTED query error occurred; for
	example, a query followed by DAB or GET before a response was
	completely sent.
-420	Query UNTERMINATED
	A condition causing an UNTERMINATED query error occurred; for
	example, the B2200 was addressed to talk and an incomplete
	program message was received.
-430	Query DEADLOCKED
	A condition causing a DEADLOCKED query error occurred; for
	example, both input buffer and output buffer are full and the B2200
	cannot continue.
-440	Query UNTERMINATED after indefinite response
	A query was received in the same program message after a query
	requesting an indefinite length response was executed.

Agilent B2200 User’s Guide, Edition 2 7-9