Agilent Technologies B2201A manual ROUTeOPENLIST

SCPI Command Reference [:ROUTe]:OPEN[:LIST]

[:ROUTe]:OPEN[:LIST]

This command disconnects the input ports from output ports as specified in channel_list. The query returns 0 or 1 for each channel specified by channel_list, in same order as specified by channel_list.

For some modes (such as Single Route Mode, Couple Mode, Ground Mode, and

Bias Mode), more complex disconnections may occur.

Syntax	[:ROUTe]:OPEN[:LIST] (@channel_list)
	[:ROUTe]:OPEN[:LIST]? (@channel_list)
	Parameter	Explanation
	channel_list	Channels to open (disconnect) or to check.
		For channel_list, see “Switch Control” on page 4-5.
Query response	open_status{, open_status} <newline><^END>
	1 : opened
	0 : closed
Example	OUTPUT @Agb2200;":ROUT:OPEN:CARD ALL"
	OUTPUT @Agb2200;":ROUT:CLOS (@10101,10202)"
	OUTPUT @Agb2200;":ROUT:OPEN? (@10101,10102,10201,10202)"
	ENTER @Agb2200;A$

In this example, A$ will be 0,1,1,0.

Agilent B2200 User’s Guide, Edition 2 5-41