Agilent Technologies B2201A manual Using Bias Mode, Bias Mode Example

Programming

Programming Examples

Using Bias Mode

The following example uses the bias mode.

Figure 4-3 Bias Mode Example

Setup:	• Channel configuration mode: Auto
	• Connection rule: Single. Multiple connection is available for the bias port.
	• Connection sequence: Break_Before_Make
	• Used module: All switch modules installed in the mainframe.
	• Bias port: AUX Input 10
	• Bias enabled output port: All output ports
	• Connection paths (connected when the bias mode is ON):
	from bias port to all bias enabled output ports
	• Connection paths (connected by the :ROUT:CLOS command):
	The following output ports will be disconnected from the bias port, and the
	following input-output connections will be made.
	from SMU1 to Output 1 (channel list 00101)
	from SMU2 to Output 2 (channel list 00202)
	from SMU3 to Output 3 (channel list 00303)
	from SMU4 to Output 4 (channel list 00404)

4-10 Agilent B2200 User’s Guide, Edition 2