Agilent Technologies B2201A manual ROUTeCONNectionRULE, Rule

		SCPI Command Reference
		[:ROUTe]:CONNection:RULE
Example	OUTPUT @Agb2200;":ROUT:CLOS (@10101,10202)"
	OUTPUT @Agb2200;":ROUT:CLOS? (@10101,10102,10201,10202)"
	ENTER @Agb2200;A$
	In this example, A$ will be 1,0,0,1.
	[:ROUTe]:CONNection:RULE
	This command sets the connection rule (Free or Single Route) for the specified card.
	The query returns the connection rule of the specified card. At *RST, all cards are
	set to FREE. See “Connection Rule” on page 3-14.
Syntax	[:ROUTe]:CONNection:RULE card_number,rule
	[:ROUTe]:CONNection:RULE? card_number
	Parameter	Explanation
	card_number	For Auto Config mode: 0 or ALL
		For Normal Config mode: 1, 2, 3, 4, or ALL
		ALL is not available for query.
	rule	FREE (free route) or SROUte (single route).
		In the free route, multiple channel connections are
		available for all input ports.
		In the single route, only 1 channel connection is available
		for each input port.
Query response	FREE or SROU <newline><^END>
Example	OUTPUT @Agb2200;":ROUT:CONN:RULE ALL,SROU"
	OUTPUT @Agb2200;":ROUT:CONN:RULE? 1"
	ENTER @Agb2200;A$

In this example, A$ will be SROU.

Agilent B2200 User’s Guide, Edition 2 5-35