Agilent Technologies B2201A manual Execution Error

Error Messages

Standard SCPI Error Messages

Execution Error

If syntax of a SCPI command header and parameter is valid, but the command cannot be executed due to some condition of the B2200, a -2XXerror occurs. The error number and message are placed in the error queue, and bit4 of the Standard Event Status Register is set.

Error	Error Message and Description
Number
-200	Execution error
	Generic execution error that cannot be determined more
	specifically.
-220	Parameter error
	The parameter value is valid, but not executable due to some
	condition of the B2200. This error occurs if more specific errors
	-221 through -224 cannot be determined.
-222	Data out of range
	A valid parameter setting could not be executed because interpreted
	value was out of range as defined by the B2200.
-223	Too much data
	A valid parameter setting (block, expression, or string type) could
	not be executed because parameter contained more data than the
	B2200 could handle due to insufficient memory or other
	requirements.
-224	Illegal parameter value
	A valid parameter setting (where exact value from list of possibles
	was expected) could not be executed due to present B2200 state.
-260	Expression error
	An expression related error occurred.

Agilent B2200 User’s Guide, Edition 2 7-7