Agilent Technologies B2201A manual SYSTemCTYPe?, SYSTemDISPlayLCD

		SCPI Command Reference
		:SYSTem:CTYPe?
	:SYSTem:CTYPe?
	This query command returns the ID of the specified card.
Syntax	:SYSTem:CTYPe? card_number
	Parameter	Explanation
	card_number	For Auto Config mode: 0
		For Normal Config mode: 1, 2, 3, or 4
Query response	AGILENT TECHNOLOGIES,model,0,revision <newline><^END>
	model = B2210A or B2211A
	revision = 1 or later version
	If designated card is not installed or initialize failed, this command returns
	NONE,NONE,0,0.
Example	OUTPUT @Agb2200;":SYST:CTYPE? 1"
	ENTER @Agb2200;A$
	:SYSTem:DISPlay:LCD
	This command enables/disables the front panel Liquid Crystal Display when the
	B2200 is in the GPIB remote mode. The front panel LCD will be automatically set
	to ON by the mode transition from GPIB remote to GPIB local.
Syntax	:SYSTem:DISPlay:LCD state
	Parameter	Explanation
	state	ON or 1: enables the LCD
		OFF or 0: disables the LCD (initial setting)
	Even though state is OFF, some status indicators on the LCD will be effective.
Example	OUTPUT @Agb2200;":SYST:DISP:LCD 1"

Agilent B2200 User’s Guide, Edition 2 5-47