Agilent Technologies B2201A Cannot use same port for Unused and Couple, Bad input port number

Error Messages

B2200 Specific Error Messages

Error	Error Message and Description
Number
3026	Cannot use same port for Unused and Couple
	The couple mode and the ground mode cannot be used in parallel
	when a couple port and the ground enabled input port (unused port)
	have been assigned to the same input port.
3027	Cannot use Unused Port during Auto Ground Mode ON
	The ground enabled input port (unused port) must be opened during
	the ground mode is ON.
3030	Bad input port number
	The input port number must be 1 to 14.
3031	Bad output port number
	The output port number must be 1 to 12, 24, 36, or 48. Maximum
	number depends on the switch module configuration.
3032	Bad setting memory number
	The internal memory number for the setup data must be 1 to 8.
3033	EEPROM programming failure
	Cannot change the GPIB address or update internal memory data.
	Contact your nearest Agilent Technologies service center.
3034	EEPROM reading failure
	Cannot read the GPIB address or internal memory data. Contact your
	nearest Agilent Technologies service center.
3035	Setting memory data is invalid
	Cannot read the setup data in the internal memory. The data has been
	broken. Delete the data.
3036	Cannot load this setting data in this configuration
	Cannot read the setup data in the internal memory due to the
	configuration mismatch. Delete the data or leave it until restoring the
	module configuration.

7-14 Agilent B2200 User’s Guide, Edition 2