Agilent Technologies B2201A manual ROUTeSYMBolPORT

SCPI Command Reference [:ROUTe]:SYMBol:PORT

[:ROUTe]:SYMBol:PORT

In the GPIB local mode, the B2200 uses 01 to 14 (two digits numbers) to specify the input ports 1 to 14 respectively. This command specifies a symbol string and lets the B2200 use the specified string instead of the two digits number. The query returns the symbol string.

Reboot and *RST clear the symbol strings. After that, the initial symbol string (two digits numbers 01 to 14) will be set.

:SYSTem:CPON does not clear the symbol strings.

Syntax	[:ROUTe]:SYMBol:PORT port_number,'symbol_string'
	[:ROUTe]:SYMBol:PORT? port_number
	Parameter	Explanation
	port_number	Input port number: 1 to 14.
	symbol_string	Symbol string set to the specified input port. Maximum 6
		characters.
		Numeric characters, alphabetic characters; upper case and
		lower case, space, and the following symbols are available.
		! " # $ % & ’ ( ) * + , - . / > ? : ~ ; < = > ? @ [ \ ] ‘ { } ^ _
Query response	symbol_string <newline><^END>
Example	OUTPUT @Agb2200;":ROUT:SYMB:PORT 1,'SMU1'"
	OUTPUT @Agb2200;":ROUT:SYMB:PORT? 1"
	ENTER @Agb2200;A$

This example assigns the string SMU1 to the input port 1. After that, SMU1 is used instead of 01. In this example, A$ will be SMU1.

Agilent B2200 User’s Guide, Edition 2 5-43