Agilent Technologies B2201A manual Self-Test

NOTE

Installation

Self-Test

Self-Test

To confirm the specifications

The self-test and diagnostics checks the operation of the mainframe and the modules. However they cannot confirm if the Agilent B2200 satisfies its specifications.

For verifying the specifications, contact your nearest Agilent Technologies Service Center. Trained service personnel will perform calibration (performance verification).

It is recommended to perform calibration once a year at least.

The following procedure performs the self-test and diagnostics.

1.Turn on the Agilent B2200.

The controller test will be performed. If the Agilent B2200 fails the test, contact your nearest Agilent Technologies Service Center.

2.Press the Shift key and the Menu key in this order. Self-test menu will appear on the LCD.

SELF_TEST	Controller test
RELAY_TEST	Relay test
KEY	Front panel interface test
BEEPER	Beeper test
LED	LED matrix test
PEN	Light pen test
GPIB	GPIB test

3.Move the cursor to the test item to perform, then press Enter key.

4.To start the test, move the cursor to EXECUTE, then press Enter key.

To display the previous test result, move the cursor to RESULT, then press Enter key.

For the details of each test, see “Selftest Menu” on page 3-34.

2-10 Agilent B2200 User’s Guide, Edition 2