Agilent Technologies B2201A manual To Open All Switches, To Save/Load Setup Data

	Front Panel Operation
	Operation
	To Open All Switches
	1. Press the Open All key.
	2. Press the arrow key to display YES, then press the Enter key.
	Status after this operation
NOTE
	When the bias mode is ON, the bias-enabled output ports will be connected to the
	input bias port.
	When the ground mode is ON, the ground-enabled input/output ports will be
	connected to the input ground port.
	To Save/Load Setup Data
	The Agilent B2200 provides the internal memory used to save the setup condition.
	Eight setup conditions can be saved into the memory.

To save the setup

1.Press the Shift key and the Load Memory key.

2.Press the arrow key to select the internal memory (01 to 08).

3.Press the Enter key to save the setup. Or press the Exit key to cancel this operation.

Wait until the save operation is completed. Then, the LCD displays the status and setup conditions.

To load the setup

1.Press the Load Memory key.

2.Press the arrow key to select the internal memory (01 to 08).

3.Press the Enter key to load the setup. Or press the Exit key to cancel this operation. Wait until the load operation is completed. Then, the LCD displays the status and setup conditions.

3-6 Agilent B2200 User’s Guide, Edition 2