
Front Panel Operation
Operation
To Set Remote Display Mode
This instruction enables or disables the data display in the GPIB remote condition. See “RMT_DSPL” on page
LCD
1.Press the Menu key. The setup menu will be displayed on the LCD.
2.Move the cursor to RMT_DSPL, then press the Enter key.
3.Move the cursor to LCD, then press the Enter key.
4.Press the arrow keys to set the remote display mode ON or OFF.
5.Press the Enter key to make the setup effective, or press the Exit key to cancel changing the setup.
LED matrix
1.Press the Menu key. The setup menu will be displayed on the LCD.
2.Move the cursor to RMT_DSPL, then press the Enter key.
3.Move the cursor to LED, then press the Enter key.
4.Press the arrow keys to set the remote display mode ON or OFF.
5.Press the Enter key to make the setup effective, or press the Exit key to cancel changing the setup.
To Return to Local Mode
Press the Local key. If the front panel keys are locked, send the :SYST:KLC command from an external computer, then press the Local key.
Agilent B2200 User’s Guide, Edition 2 |