Agilent Technologies B2201A manual Device-Dependent Errors, Device-specific error, Memory error

Error Messages

Standard SCPI Error Messages

Device-Dependent Errors

-3XXerrors indicate that an B2200 operation did not properly complete, possibly due to an abnormal hardware or firmware condition. These negative codes are SCPI defined. For the device-dependent positive error codes, see “B2200 Specific Error Messages” on page 7-10. The positive codes are not SCPI defined.

For these errors, an error number and message are placed in the error queue, and bit3 of the Standard Event Status Register is set.

Error	Error Message and Description
Number
-300	Device-specific error
	Generic device-dependent error for the B2200 that cannot be
	determined more specifically.
-311	Memory error
	An error was detected in the B2200's memory.
-350	Queue overflow
	If error queue is full, this code is entered into the error queue instead
	of the code that caused the error. This code indicates that there was
	no room in the error queue, so an error occurred but was not
	recorded.

7-8 Agilent B2200 User’s Guide, Edition 2