Agilent Technologies B2201A manual Saving Input/Output Labels

Programming

Programming Examples

	Saving Input/Output Labels
	You can define labels to use for the input/output ports when you control the switch
	in the GPIB local mode. The labels are cleared by *RST. So it is recommended to
	save the labels into the internal memory and define a comment for the memory data.
	You can see the comment when you load/save the memory data in the GPIB local
	mode.
Setup:	• Channel configuration mode: Auto
	• Label for input 1: SMU1
	• Label for input 2: SMU2
	• Label for input 3: SMU3
	• Label for input 4: UNUSED
	• Label for input 5: SMU4-F
	• Label for input 6: SMU4-S
	• Label for input 7: SMU5-F
	• Label for input 8: SMU5-S
	• Label for input 9: OPEN
	• Label for input 10: BIAS
	• Label for input 11: OPEN
	• Label for input 12: GROUND
	• Label for input 13: CMU-H
	• Label for input 14: CMU-L
	• Label for output 1: BULK
	• Label for output 2: SOURCE
	• Label for output 3: GATE
	• Label for output 4: DRAIN
	• Label for output 5: GROUND
	• Comment for memory 1: Port label info

4-16 Agilent B2200 User’s Guide, Edition 2