Agilent Technologies B2201A manual LCD Display Items, Label Description

		Front Panel Operation
		Display Functions
Table 3-5		LCD Display Items
	Label	Description
	01 to 14	Port function assigned to the input ports 1 to 14. B (bias port), C (couple port),
		G (ground port), - (ground enabled port), or blank (no function).
	Shift	Shift key status indicator. The triangle mark appears when the sub key is active.
	Remote	Remote status indicator. The triangle mark appears when the Agilent B2200 is in
		the GPIB remote condition.
	Lock	Key status indicator. The triangle mark appears when the front panel keys are
		locked by an external computer.
	Error	Error status indicator. The triangle mark appears when any error has occurred.
	Card#	Slot number of the switch module to be monitored. Displays A when the channel
		configuration mode is Auto. In the auto mode, the modules installed in the
		mainframe from slot number 1 continuously will be controlled as one module. Or
		displays 1 to 4 when the channel configuration mode is Normal. The module can
		be selected by the Card Selection key.
	Bias	Bias mode status indicator. The triangle mark appears when the mode is ON.
	Couple	Couple mode status indicator. The triangle mark appears when the mode is ON.
	Gnd	Ground mode status indicator. The triangle mark appears when the mode is ON.
	Rule	Connection rule, FREE (plural route mode) or SINGLE (single route mode).
	Sequence	Connection sequence, BBM (Break Before Make), MBBR (Make Before Break), or
		NO_SEQ (No Sequence).
		In the remote mode and the default setting, only the Remote, Lock, and Error
NOTE
		indicators are available. To display all information, set the RMT_DSPL function
		ON. Refer to “RMT_DSPL” on page 3-33.

3-24 Agilent B2200 User’s Guide, Edition 2