Backup Services Commands
Page 34-12

Viewing Backup Service Statistics

To view the statistics of a back service, enter the bsstatus command in the following manner:
bsstatus b<backupIndex>
where b<backupIndex> is the service index number assigned to the service when it was
created. For example, to see the statistics for a backup service with an index number of 1,
enter:
bsstatus b1
A screen similar the following displays:
Status for Backup Index: 1.
Current State :Primary Up
Number of Times Primary Port Disconnected :0
Number of Times Backup Port Disconnected :0
Number of Times Backup Port Initiated :0
Number of Times Backup Port Connected :0
Number of Times Primary Port Connected :0
As a variation of this command, enter the bsstatus command without specifying the service
index number. A screen displays showing all backup services on the switch, as shown:
Slot/
Primary Port/ Bkp Peer Current.
Idx Description Type Dlci/ Type Id State
==== =============== ===== ===== ===== ===== ==========
1 Port 5/1/0 Peer 1 Primary Up
Current State. The current state of the backup service. The options for this are Primary Up,
Primary Down, Backup Up, Backup Down, Backup Initiated.
Number of Times Primary Port Disconnected. The number of times the primary port has discon-
nected since the last clearing of statistics for this service.
Number of Times Backup Port Disconnected. The number of times the backup port has discon-
nected since the last clearing of statistics for this service.
Number of Times Backup Port Initiated. The number of times the backup port has been activi-
ated since the last clearing of statistics for this service.
Number of Times Backup Port Connected. The number of times the backup port has connected
since the last clearing of statistics for this service.
Number of Times Primary Port Connected. The number of times the primary port has connected
since the last clearing of statistics for this service.