Modifying Multicast VLANs
Page 23-10
Changing a VLAN’s Description
1. At the Option= prompt enter a 2 and press <Enter>.
2. The following prompt displays:
Enter a new description:
Type in the revised description for this multicast VLAN. The description can be up to 30
characters long. Press <Enter> when you have completed the new description.
The system returns to the Available Options menu. You can modify more attributes for this
multicast VLAN, or quit modifying the multicast VLAN by typing an 6.
Adding More Policies for This VLAN
1. At the Option= prompt enter a 3 and press <Enter>.
2. The following menu displays:
Select rule type:
1. Port Rule
2. MAC Address Rule
3. Multicast Address Rule
Enter rule type (1):
This is the same menu used by the crmcvl command. This menu has three options, some
of which contain multiple branching options. This menu is documented fully in the
section, Step C. Defining the Recipients of Multicast Traffic on page 23-7. Please consult
this section for information on this menu.
When have entered all new rule types, the system returns to the Available Options menu.
You can modify more attributes for this multicast VLAN, or quit modifying the multicast
VLAN by typing an 6.
Deleting A Policy for This VLAN
1. At the Option= prompt enter a 4 and press <Enter>.
2. The following menu displays:
Enter rule number to delete:
The rule number is listed with other information on the multicast VLAN just after you
entered the modmcvl command. Find the number corresponding to the rule you want to
delete and enter it at this prompt and press <Enter>. The rule is deleted and the system
returns to the Available Options menu. You can modify more attributes for this multicast
VLAN, or quit modifying the multicast VLAN by typing a 6.