Remote Network Monitoring (RMON)
Page 14-5
Time
Time since the last change in status.
System Resources
Amount of memory that has been allocated to this probe.
To see the detail for each of the probes enter the probes command followed by the entry
number as shown below.
/Networking % probes 1
RMON Probe Summary
Entry Slot/Port Flavor Status Time System Resources
1 2/ 1 Ethernet Active 0 hrs 39 mins 312 bytes
Probe’s Owner: Omni Switch/Router Ethernet probe on slot 2 port 1
/Networking % probes 2
RMON Probe Summary
Entry Slot/Port Flavor Status Time System Resources
2 2/ 1 History Active 0 hrs 4 mins 3656 bytes
Probe’s Owner: andy
History Control Buckets Requested = 60
History Control Buckets Granted = 60
History Control Interval = 60 seconds
History Sample Index = 6
/Networking % probes 3
RMON Probe Summary
Entry Slot/Port Flavor Status Time System Resources
3 2/ 1 Alarm Active 0 hrs 0 mins 1336 bytes
Probe’s Owner: andy
Alarm Rising Threshold = 3000
Alarm Falling Threshold = 3000
Alarm Rising Event Index = 1
Alarm Falling Event Index = 3
Alarm Interval = 30 seconds
Alarm Sample Type = delta value
Alarm Startup Alarm = rising or falling alarm
Alarm Variable = ethernet octets received

Monitoring Events

The events command has one optional parameter. The format is:
events [clear]
where:
clear - clears the event log. (You can only do this with the “admin” login.)
RMON Logged Events Summary
Entry Time Description
1 0 hrs 26 mins Rising threshold alarm for etherStatsOctets on slot 2 port 1
2 0 hrs 27 mins Rising threshold alarm for etherStatsOctets on slot 2 port 1