Deleting a PPP Entity
Page 30-21

Deleting a PPP Entity

The pppdelete command is used to delete an existing PPP Entity.
1. Before you can delete a PPP Entity, you must first delete all the links associated with it.
You do so using the linkdelete command (see Chapter 31 titled “WAN Links”). If you try to
delete a PPP Entity that still has links associated with it, the following message will be
displayed:
Delete PPP Peer ID: 1 aborted because the following link(s) attach to it.
Link Index: 1, Description: Link Entry: 1, Peer ID: 1
2. To delete a specific PPP Entity (after deleting all links associated with it), enter the Peer
ID number along with the pppdelete command. For example, to delete Peer ID 2, enter
the following command:
pppdelete p2
A screen similar to the following displays:
This will delete the configuration for PPP Peer ID: 2
Continue ? {(Y)es, (N)o} : N
3. To delete this entity, enter y and press Enter. If you decide to cancel out of the deletion,
press Enter to accept the default answer of No. The system prompt will reappear.