Alcatel Carrier Internetworking Solutions Switch/Router Displaying the Status of a Specic PPP Entity

Displaying PPP Entity Status
Page 30-19
BCP Oper State
Indicates the operational state of the Bridging Control Protocol option. Open means that the
bridging operation is active. Closed means that the bridging operation has not yet reached the
open state. The reasons why the state may be closed are: 1) the call has been disconnected,
2) the protocol is in the process of making a connection, or 3) the Bridging option was not
configured.
CCP Oper State
The operational state of the compression control protocol option. Open means that
compression is active. Closed means that compression has not reached the open state. The
reasons why the state may be closed are: 1) the call has been disconnected, 2) the protocol is
in the process of making a connection, or 3) the compression option was not configured.
Displaying the Status of a Specific PPP Entity
To view both the operational status and the relevant statistics of a specific PPP Entity, for
example, Peer ID 1, enter the following command:
pppstatus p1
A screen similar to the following displays:
PPP statistics for Peer ID: 2
IP IPX BCP CCP
Admin Oper Oper Oper Oper
State Mode State State State State
====== ====== ====== ====== ====== =======
UP Normal Open Close Open Close
LCP Pkts IPCP Pkts IPCP Pkts BCP Pkts CCP Pkts
IN/OUT IN/OUT IN/OUT IN/OUT IN/OUT
======= ======== ======= ======== =========
3/4 2/2 0/0 4/4 0/0
Packets Packets Packets Octets Octets
In Out In+Out In Out %In %Out
======= ======= ======= ======= ======= ==== =====
Total 2232 1475 3707 91751 66034
Ethernet 0 146 146 0 13413 0 20
8025 0000000
FDDI 0000000
IP 79 158 237 7784 6952 8 10
IPX 0000000
BPDU 2153 1171 3324 83967 45669 91 69
STAC-LZS Compressed Compressed Uncompressed Compression
Compression Frames Octets Octets Ratio
=========== =========== ============ ===========
In 0 0 0 0.0:1
Out 0 0 0 0.0:1
IN+Out 0 0 0 0.0:1
The additional fields produced by the pppstatus command when a specific Peer ID is entered
with the command are as follows:
LCP Pkts IN/OUT
The total number of Link Control Protocol (LCP) packets received (In) and transmitted (Out)
on this PPP connection.