Generic Service UDP Relay
Page 26-21

Modifying a Generic Service

Use the Configured Generic Services screen to modify an existing generic service. On the
Generic Services Menu, enter 41. A screen similar to the following displays:
Configured Generic Services
Item State Port Number Description Servers/Vlans
(1) enabled 80 TFTP 198.172. 5. 4
Enter item number of service to be modified [‘h’ for help/<ret> to exit] :
The parameters are defined here.
Item
A unique number assigned by the switch to the generic service in the order the services were
configured using the Add new Generic Service screen.
State
The current state of the service, enabled or deleted. The service is enabled as soon as it is
added using the Add new Generic Service screen.
Port Number
The well-known UDP number configured for the generic service on the Add new Generic
Service screen.
Description
The description of the generic service configured on the Add new Generic Service screen.
Servers/Vlans
The servers or VLANs that the relay will forward to.
To modify an existing generic service:
1. On the Configured Generic Services screen, enter the item number of the relevant service.
The Modify existing Generic Services Menu displays similar to the following:
41) +Modify existing Generic Service Menu
411) Description of Service being modified : TFTP
412) Forwarded port : 80
413) Next-hop Address {list/add/delete} : SET
414) Forward to VLANs {list/add/delete} : SET
Command {Item/?/Help/Quit/Done/Redraw} {Redraw} :
2. Modify any of the parameters in the same way you configured them (described in Adding
a Generic Service on page 26-19).
3. Enter d to keep the current changes and return to the Generic Services Menu. (The relay
will not be initialized with the changes until you save them on the UDP Relay Configura-
tion screen.)