Backup Services Commands
Page 34-13
Idx. The index number of the backup service.
Description. Enter a description of the backup service in this field. Your description may
consist of a maximum of 30 ASCII characters.
Primary Type. This field shows the type of entity that will be backed up in the case of network
failure. The available options are Physical Port and Frame Relay PVC DLCI.
Slot/Port/Dlci. The slot, port number, and DLCI number (if applicable) attached to this backup
service.
Bkp Type. This field shows the entity type to be used as a backup in the event of primary fail-
ure. At this time, the only available backup type is PPP.
Peer Id. The identification number of the peer that has the backup port for this service.
Current State. The current state of the backup service. The options for this are Primary Up,
Primary Down, Backup Up, Backup Down, Backup Initiated.

Clearing Backup Service Statistics

To clear the statistics for a backup service, enter the bsclear command as shown:
bsclear b<backupIndex>
where b<backupIndex> is the service index number assigned to the service when it was
created. For example, to clear the statistics for a backup service with an index number of 1,
enter:
bsstatus b1
A prompt similar the following displays:
This will reset the statistic for Backup Index: 1
Continue ? {(Y)es, (N)o} (n) :
Enter y to clear the statistics.