Configuring SNMPv3 Groups
An SNMPv3 group sets the access policy for its assigned users , restrict ing them to
specific read, write, and notify views. You can use the pre-defined default groups or
create new groups to map a set of SN MP users to SNMP views.
Command Attributes
• Group Name – The name of the SNMP group. (Range: 1-32 characte rs)
• Model – The group security model; SNMP v1, v2c or v3.
• Level – The security level used for the group:
- noAuthNoPriv – There is no authe nticat ion or encrypti on u sed in SN MP
communications.
- AuthNoPriv – SNMP communications use authentication, but the da ta is not
encrypted (only available for the SNMPv3 security model).
- AuthPriv – SNMP communications use both authentication and encryption (only
available for the SNMPv3 security model).
• Read View – The configured view for read ac cess. (R ange: 1-32 ch aracters )
• Write View – The configured view for write access. (Range: 1-32 character s)
• Notify View – The configured view for notifi cation s. (Range : 1-32 chara cters)

5-13

Configuring SNMPv3 Management Access

5