Asante Technologies 40240/40480-10G mst priority , name , 33-9, mst priority,

mst priority
This command configures the priority of a s panning tree ins tance. U se the no form
to restore the default.
Syntax
mst
instance_id priority priority
no mst instance_id priority
• instance_id - Instance identifier of the spanning tree . (Range: 0- 4094)
• priority - Priority of the a spanning tree instance.
(Range: 0-61440 in steps of 4096; Options: 0, 4096, 8192, 12288, 16384 ,
20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344,
61440)
Default Setting
32768
Command Mode
MST Configuration
Command Usage
• MST priority is used in selecting the root bridge and alte rnate brid ge o f the
specified instance. The device with the highest priority (i.e., lowest nume rical
value) becomes the MSTI root device. How eve r, if a ll d evic es h ave the sam e
priority, the device with the lowest MAC address will then become the root
device.
• You can set this switch to act as t he M S TI roo t device by specifying a pr i or it y
of 0, or as the MSTI alternate device by spe cifying a priority of 16384.
Example
Console(config-mstp)#mst 1 priority 4096
Console(config-mstp)#
name
This command configures the name for the mult iple spa nning tr ee regio n in which
this switch is located. Use the no form to clear the n ame.
Syntax
name
name
name - Name of the spanning tree.
Default Setting
Switch’s MAC address
Command Mode
MST Configuration
33-9
mst priority
33